Proxxon 34108 Micro Mill FF 230

Proxxon micro mill FF230 is a small, accurate milling system used to mill, drill, and countersink steel, cast iron, aluminum, brass, and plastic. The headstock swivels through 360-Degree indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as a fine feed when milling. One revolution equals 1/32-Inch (1mm) travel, 1 division equals .002-Inch (0.05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64-Inch, 5/16-Inch and 25/64-Inch (6, 8, and 10mm). The solid table has a size of 10-5/8-Inch by 3-5/32-Inch (270 by 80mm) and is T-slotted to 15/32-Inch by 15/64-Inch by 13/64-Inch. Warranty Description Limited Warranty of Proxxon Power Tools for home use. Prox-Tech, warrants to the original purchaser only that all Proxxon consumer power tools will be free from defects in material or workmanship for a period of two years from the date of purchase. Seller's sole obligation and your exclusive remedy under this limited warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are d