ProxSmart (â„¢) Wireless Electronic Handwheel MPG Pendant USB Mach3 for CNC Milling Machine, CNC Lathes

Description:
This wireless mpg could work with Mach3 software. The wireless distance is 40 meters. It can support 64 sets of equipment used simultaneously.
RF Performance Description:
- The RF is Standard with 2.4G ISM ,the Tx power is 0DB and the RX sensitivity is -98DB;
- The RF has 64 channels,the channel gap is 1Mhz;
- The transmission distance is further than 15 meters with no barrier
- The protocol Designed with high performance;Low power consumption;Automatic learning ID Number;
- To jump frequency Adaptively when noised ,which can work with 2.4G wireless Mic ,Wlan and Bluetooth etc. devices.
- 64 sets Wireless Handle work fine at the same time in one room ,with no-interference each other (old Version only work for 32 set at the same time.)
- Support wireless handwheel function, 100PPR the manual pulse generator output;
- Display, real-time display of the machine the workpiece coordinates, mechanical coordinates.Coordinates X,Y and Z 3-axis with the screen display.
DC Description:
Wireless USB Receiver: 4.5~5.0V, Less than 50mA
Wireless Handle: 1.5~3.0V, Average Current is Less than 2mA, Use of time More than 2 months USE Two 2000MAH Battery .
Application:
The Wireless Manual Pulse Generator can are widely used in CNC milling machine, CNC milling, CNC lathes, machining centers and other areas.
Packing Parts:
1 x 2016 Version Wireless Handle MPG
1 x Wireless USB Receiver
1 x Software CD
1 x English Manual