ProRestore - Electro - Gen Thermal Fogger

Quick Overview: The Electrogen Thermal Fogger is a versatile odor control application tool. The ElectroGen® produces "DRY FOG" that can penetrate deep into affected areas and impossible to reach interior cavities. A great addition to wet cleaning deodorizing and a must for fire and smoke damage. Features: The ElectroGen® converts one ounce of Thermo 55® into a 2,000 cubic foot deodorizing cloud - IN JUST 30 SECONDS! Specially insulated barrel produces smallest particle size. The machine comes with an instruction and maintenance manual. Insist on the Original...If it doesn't say Unsmoke®, it's not an Electro-Gen®, the industry's most durable electric thermal fogger. Wet particles produced by conventional sprayers and ultra low vapor foggers may cause unwanted moisture problems inside wall cavities. The dry fog produced by the ElectroGen fogger consumes just 1 ounce of solvent based deodorizer per minute. Remove the barrel and the Electro- Gen® also can be used as an electric sprayer to apply solvent or water based chemicals for deodorizing, disinfecting, flame proofing, pest control, fabric protecting, etc. ElectroGen Thermal Fogger Maintenance The Electrogen Thermal Fogger is extremely easy to maintain. 1. Make sure the unit has not been in use and that the barrel is cool to the touch. Remove the barrell 2. Pour any remaining solution back into its original container. 3. Rinse solution canister thoroughly. Add clean water and reattach canister to fogger. TIP - Add a small amount of dish soap to the water 4. Run fogger with barrel OFF for at least 1 minute. 5. Discard remaining liquid, dry out canister, replace and store. **WILL ONLY FOG WITH SOLVENT BASED CHEMICALS**