Print Head Cleaner for HP Printers - 5oz 150ml

Safety notes
Keep out of the reach of children
Eye protection is recommended during use

Cleans blocked HP inkjet printers quickly and easily. Watch our tutorials on Youtube
HP video id: iHd-5H2t1s8

Compatibility Notes
œ"︎ Compatible with all HP printers where the cartridges are housed in the print carriage
œ˜ Not compatible with pigment ink
œ˜ Not compatible with printers where the ink cartridges remain static during printing
Printer must be clear of all error messages before use, including 'clean printer head'
We recommend using fresh ink from a different supplier after cleaning (if your ink caused the blockage it can block the head during priming)

Each Kit contains
˜› 5 oz Printhead Cleaning Fluid
˜› Syringe
˜› 8" Connector tubing
˜› 1 Pair Green printhead adaptors
˜› 1 Pair Nitrile Powder-free Gloves
˜› Laminated Instruction Card

Instructions for use
1. Print a nozzle check pattern to identify which colors need cleaning
2. Warm up the cleaning fluid and remove ink cartridges
3. Remove printhead (if possible)
4. Connect adaptors to syringe and inject 2ml fluid into each nozzle to be cleaned
5. Leave to stand for 5 min
6. Inject a further 1ml
7. Reinstall head and fresh cartridges
8. Run 2 cleaning cycles to prime printhead

The kit works in 90% of cases and comes with troubleshooting notes.
If the kit does not clean your head please contact us for advice: if we cannot fix your printer we send a $15.00 refund.