Power Limiter for RF Explorer

The Power Limiter for RF Explorer Meters is a custom device designed from scratch to be the perfect protection against strong RF fields. All RF Explorer models have some power ranges for input signal beyond which can be damaged. For most models, the limit is on +5dBm, some others are ok up to +10dBm but only WSUB3G (as well as the RF SMA connector on the right side in a 3G Combo) is protected up to +30dBm. The new RF Explorer Power Limiter will allow any RF Explorer model to be protected with external signals up to +30dBm (1 Watt), so you get the same level of protection as in the WSUB3G. Furthermore, the power limiter includes additional functionality inside that will otherwise require external devices increasing cost and size: Power limiter: With protection up to +30dBm, for any frequency range between DC-3000Mhz DC block: You are able to connect any external DC source up to 16V with no risk of damaging your RF Explorer or interfering in your measurement. Attenuator: Includes an internal 6dB attenuator to help you extend the range of power signal measurements. 6dB attenuation means only of the input power is received by the unit. To compensate for this extra attenuation you should indicate OffsetDB:+006 in the ATTENUATOR MENU of your RF Explorer. The Power Limiter is assembled in a aluminum case and it is very compact when compared to other comparable products, not to mention it includes internal DC block and attenuator which makes it a really small device for what it offers. It is a recommended add-on to all RF Explorer users who potentially will expose their unit to strong external fields. Additional Specifications: Output power max: +4 dBm. Attenuation: 6 dB Impedance (Nominal): 50Ω V.S.W.R (Max): 1.25 : 1 Connector type: SMA male - female Connector: Brass / Gold plating