Power Handle for PENN 4/0 113H 113HL 320/330/340GTI

New Aluminum Power Handle for PENN 4/0 reels as well as many other PENN Reels. ONE new Round Aluminum Power handle. The knob and handle blank are constructed from 6061 Aluminum. The hollow aluminum knob, 1.85" (47mm) in diameter, is extremely light weight and incredibly comfortable. The handle blank is 3.75" in length. The length being longer than the original, it provides for greater torque. The knob and handle blank comes in BLACK only.Attaching the Knob to the Handle Blank:First, remove the Philips head screw from the bottom of the knob. Keep the large washer on the internal knob pin as the washer is positioned between the knob and the handle blank; not between the knob and the Philips head screw. To attach the knob to the handle blank, you must unscrew the two halves of the knob. Place a normal screw driver into the bottom half of the knob and use the screw driver to push the internal pin past the bottom of the knob. Place a small amount of Loctite Blue 242 into the opening of the internal pin. Attach the Philips head screw thru the handle blank into the knob. With the normal screw driver inserted into the top of the pin to prevent rotation, tighten the Philips head screw. These handles will also fit the following PENN reels: 113H, 113HL, 113HLW, 113HSP
320GT, 320GT2, 321GT, 330GT
970, 980, 990
25GLS, 225LD, 320LD
340GT, 345GT, 40GLS, 45GLS, 245LD, 246LD
20, 20T, 30, 30T, 30TW, 50, 50T, 50TW, 50W
30SW, 50S, 50SW, 220GTO, 230GTO Click Here to View Complete Application Note