PoE Texas PoE-Tester | Inline Tester for Power Over Ethernet | Display 20 to 56 Volts, 0-5 Amps and Display Actively Used Power 802.3af/at and Passive PoE at 10/100/1000 Data Rates

The PoE Tester Quickly Identifies PoE on Any Cable. Great for testing PoE Cameras, IP Phone and Wifi Installations - This PoE tester belongs in every tool kit!
The tester will display the power used, voltage available, and current flowing. Simply connect the RJ45 from your PoE switch or injector to the RJ45 input, then connect inline to your camera, phone, wifi or other 802.3af/3at PoE device.

Product Features
Quickly diagnose PoE problems
Easily detect how much power any PoE or DC powered device requires
Measure available voltage at the remote end of a PoE connected device
Observe loss in the Ethernet cable
Mode A display from 20v to 56 volts
Mode B display from 20v to 56 volts
DC input display from 5v to 56 volts
Measure PoE currents up to 500 ma (28 watts)
Use the 2.1mm DC connectors to measure voltage and current / power in 24, 48 and 56 volt installations
DC current up to 5 amps
2.1mm to 2.1mm jumper included
Bright, easy to read LED display - alternates between Voltage, Current and Power
Powered by PoE - No batteries required