PoE Texas POE-16-48v120w | 16 Port Passive PoE Injector - Power Over Ethernet for 802.3af Cameras, IP Phones, Access Points and More with 10/100 Data

Upgrade your network to PoE using this 16 Port Rack Mounted Power over Ethernet midspan injector. Remove clutter in your installations and extend power up to 328 feet (1 meter) away from the source. Use this device to replace up to 16 individual power over ethernet injectors and condense into one single POE module. Use for IEEE 802.3af/at PoE applications with up to 120 watts shared on all ports.

Product Features:
Extend power up to 328 ft (100 meters)
1:1 (LAN:POE) application with 16 shielded LAN RJ45 Ports and 16 shielded RJ45 ports with Data + Power out
Passive Mode B operation on pins 4,5(+) 7,8(-)
10/100 Mbps data capability
650mA power per port limit
2.1mm x 5.5mm DC power input
Secondary screw terminal input with ground for direct wire DC input
LED power status
48 volt, 120watt power supply included (100-240v input, 50/60hz, UL/CE approved)

Compatible Devices
WiFi Access points
IP Phones
IP Cameras
Other 802.3af PoE devices

Other products from PoE Texas
We offer 10/100 and gigabit midspan injectors, PoE switches, and PoE splitter/converters for non-PoE devices.
GPOES-8-7AB-24v60w: 8 port gigabit switch
POE-8-24v60w: 8-port midspan injector with 10/100 speed data
GPOE-16AB-24v120w: 16-port gigabit midspan injector
POE-12-48v120w: 12-port midspan injector with 10/100 speeds for 802.3af devices
GPOE-16A-48v120w: 16-port midspan injector with Gigabit speeds for 802.3af devices
PoE-Tester: Voltmeter to display power used by a device
5 and 12 volt splitters