PoE Texas 8 Port PoE Injector - 10/100 Passive Power Over Ethernet with 48V 60W UL Power Supply - 802.3af PoE Injector for VoiP Phones, WiFi Access Points, IP Cameras - Add PoE to A Non-PoE Switch

Our Best Selling PoE Injector*
Proven reliability since 2011
10/100 data rate
Adds PoE to any switch or router
Power up to 8 Cameras, WiFi AP's or IP Phones with 60 watts total combined power
Power any 802.3af device
Power any "12v,PoE" device (see our video for info)
Designed for wall mount installation
8 data in, 8 data + PoE out
Extends power up to 328 ft or 100 meters
Passive PoE - Power is on all the time
2.1mm DC connector
* This is not a switch - you use it to add PoE to any switch or router

Power Supply Included
48 volts DC, 1.25 amps, 60 watts
110 to 220 volt AC operation
90% efficient
UL, CE and FCC approved
Unique mounting holes
Reversing cable for Cisco 7940 and 7960 is included

Details
This device provides power on the spare data wires in the Ethernet cable. All devices receive the same voltage (48v). The total available power for all devices combined is 60 watts. Check device specs for power needs to ensure that you have adequate wattage to support all 8 ports. Consumption varies per device and model. Passive power means power is on all the time. Contact our expert tech support for compatibility questions.

Other products from PoE Texas
WS-POE-8-48v120w for 120 Watts (double the power)
WS-POES-8-7-48v60w passive 7-port switch
WT-GPOE-4-48v48w for gigabit data
WS-POE-16-48v120w for 16 ports, 120 watts
WS-PoE-Tester to display power used by a device
WT-AF 5 and 12 volt step down converters for non-PoE devices

As always, our products are backed by our 1-year manufacturer warranty