Phobya Balancer 150 Reservoir - Silver Nickel

Another innovative component for your watercooling system by Phobya! The newest innovations combined with exclusive appearance and proven functionality. The top and bottom are made from solid metal and combined with a transparent tube made from Plexi. The reservoir is shipped with two black mounts with safety latch. These mounting clips have a foam plastic sheet at their inside to protect the Plexi of the reservoir. Versatility and functionality were a great factor when designing this reservoir. You will notice the large number of connection threads, two at the bottom and two at the side of the bottom piece, which allows a great variety of mounting possibilities. The threads at the side especially make horizontal installation of the reservoir easily possible, giving you a whole array of new possibilities. The fifth connection thread in the top piece can be used as an In- our outlet when installed horizontally or for connection of a Fillport etc. Another possibility is to equip the unused threads with lighting modules to shine a whole new light on your reservoir! An ''Anti-cyclone'' was integrated. This separating plate prevents vortexing inside of the reservoir and also prevents stronger pumps to suck in air bubbles from the inlet. All connection threads in the reservoir are 1/4" in size. Thee nickel plated screw plugs are included for the unused threads. Both bottom and top piece may be removed for cleaning of the tube. All mounting material is also included! Note: The outer diameter is 50mm, the inner diameter is 40mm. So the thickness of the wall is 5mm. The thread M42x1.5. Model: 45217.