Phidget LED-64 Advanced

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using pulse-width modulation. These LED outputs can also be used to interface other devices that benefit from pulse width modulation (such as buzzers, fans, and other small, simple electronics).
Most standard LEDs have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board output. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA.
Note: Cut the Double Ended cables in half and solder the cut end to the LED. Check the Getting Started section of the User Guide for more detailed information.
Product Specifications
Physical Properties
API Object Name - LED
Number of LED Outputs - 64
Recommended Wire Size (Power Terminal) - 12 to 26 AWG
Power Jack - 5.5 x 2.1mm Center Positive
Operating Temperature Min - -40 °C
Operating Temperature Max - 85 °C
Electrical Properties
Current Consumption Min - 70 mA
Supply Voltage Min - 6 V DC
Supply Voltage Max - 15 V DC
PWM Resolution - 12 bit
PWM Frequency Max - 1 kHz
Selectable Output Voltage Levels - 1.7, 2.75, 3.9, 5.0 VDC
Output Current Limit Max - (Per LED) 80 mA
LED Current Limit Max - 80 mA
LED Current Limit Resolution - 1.3 mA
USB Speed - Full Speed