Pettit Copper Bronze Hard Racing Paint, Quart

Pettit Old Salem Copper Bronze Hard Racing Non-Antifouling Marine PaintQuartPettit Old Salem is recommended for use in fresh water on racing hulls, sailboats, runabouts or cruisers. It is a non-antifouling hard racing finish that can be buffed to give a high-gloss, ultra-smooth surface. It can be used in saltwater for small, dry sailed boats which are not left in the water. Hard Racing Copper Bronze may be applied over most aged hard racing non-antifouling coatings. If the old paint type is unknown, sand a small area and apply a test patch of Hard Racing Copper Bronze to test its compatibility with the old paint.Features: Excellent for trailered boats Suitable for use on fiberglass, wood and steel hulls Can be buffed to give high gloss, ultra smooth surface For dry sailed boats or boats stored in fresh waterSpecifications: Finish: Glossy Color: Bronze Coverage: 800 sq. ft/gal. Number of Coats: 2DO NOT USE THIS PRODUCT ON ALUMINUM HULLS OR OUTDRIVES.***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***How to ApplyHOW TO APPLY PETTIT OLD SALEM COPPER BRONZE HARD RACING NON-ANTIFOULING MARINE PAINTApplication Method: Brush, Roller, Airless or Conventional SprayColor: BronzeFinish: GlossyNumber of Coats: 2Application Temp: 50F Minimum | 90F MaximumThinners: 120 Brushing Thinner | 121 Spraying ThinnerCoverage: 800 sq. ft. /gal.DRY TIMES: Temp. To RecoatTo Launch 90F 8 Hours 2 Days70F 16 Hours 4 Days 50F 36 Hours 8 Days PRE-APPLICATION: Old Salem Copper Bronze Hard Racing Paint is loaded with copper flake pigment. There is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix and paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. Do not thin Copper Bronze Hard Racing more than 5% (6.4 ounces per gallon).SURFACE PREPARATION AND APPLICATION:Bare Wood Sand surface completely smooth with 80 grit produ