Orion HCCA-D2400 High Current Competition Class D Mono (1 channel) 2400 Watts Amplifier

2400W Class D Mono Amplifier •RMS @ 4 Ohm: 1 x 425 •RMS @ 2 Ohm: 1 x 800 •RMS @ 1 Ohm: 1 x 1200 •RMS Power Range : 425-1200 Watts •Number Of Channels: 1 •Maximum Power: 2400 Watts •Built In Crossovers: Yes •Channel Separation: Yes •Variable low-pass 30Hz to 250Hz •variable high-pass with INTELLi Q 20Hz to 150Hz •10dB of boost with INTELLi Q •Remote gain capable •Selectable AUX out •Fuse size: (3) 40 ATC •2/1 Channel Operation •Adjustable Crossover (LP) •Auto Overcurrent Protection •Bass EQ Circuit •Bass Engine Ready •DC Straight Design •DC-DC PWM Power Supply •Discrete Pre-Amp Stage •Gold Plated RCA Input Connectors •Input Mode Selector Switch •MOSFET Final Outputs •MOSFET Power Supply •MultiMode •Noise Elimination Coil •One side Terminal Layout •Phase Selector •STAR Circuitry •Solid Copper Bus Bars •Speaker Level Inputs •Subsonic Filter •Top Mounted LED Power Indicator •Specifications: ◦Dividing Network : 50Hz-200Hz HP/LP (12dB/oct) ◦Foot Print (WxHxD)in : 7-1/8O x 11O x 2-3/8O ◦Foot Print (WxHxD)mm : 180mm x 280mm x 60mm ◦Frequency Reponse : 10Hz - 50kHz (+0, - 1dB) ◦Heat Sink (WxHxD)in : 7-1/8O x 10-1/4O x 2-3/8O ◦Heat Sink (WxHxD)mm : 180mm x 260mm x 60mm ◦Input Impedance : 10k ohm ◦Input Sensitivity (for rated power) : 200mV ~ 4.0V ◦Power Requirements : 14.4V DC (11V to 16V) ◦Signal to Noise (S/N) : 100dBA (referenced to rated power) ◦Slew Factor : greater than 5 ◦Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged MAX Power (at 14.4V,EIAJ) ◦Bridged 4 ohms : 400W x 1 ◦Per channel into 4 ohms : 140W x 2 RMS Power (at 12V,20Hz-20kHz) ◦Bridged 4 ohms : 150W x 1 (0.3% THD) ◦Per channel into 2 ohms : 75W x 2 (0.3% THD) ◦Per channel into 4 ohms : 40W x 2 (0.08% THD RMS Power (at 14.4V,20Hz-20kHz) ◦Bridged 4 ohms : 200W x 1 (0.3% THD) ◦Per channel into 2 ohms : 100W x 2 (0.3% THD) ◦Per channel into 4 ohms : 60W x 2 (0.08% THD