OpenVox D110E 1 Port T1/E1/J1 PRI PCI-E Card

OpenVox D110E is the worldwide affordable single port T1/E1/J1 card and delivers the great voice quality over telephony systems. It supports up to 30 voice calls or 2.048 Mbps of full-duplex data throughput over four T1, E1, or J1 lines.
The D110E supports E1, T1 and J1 environments. It is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipments and allows inexpensive T1 channel banks to connect with E1 circuits.
D110E supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.
D110E works with Asterisk, Elastix, FreeSWITCHTM, PBX in a Flash, trixbox, YateTM and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Target Applications
Voice-over Internet Protocol (VoIP) Services
Complex IVR Trees
"Meet-Me" Bridge Conferencing
Calling Card Platforms
VoIP Gateways (support SIP, H.323, and IAX),
Legacy PBX/IVR Services,
Voice/Data Router (replasce expensive routers)
PRI/Switch Compatibility - Network or CPE.
Technical Specifications
Single T1/E1/J1 port with PCI-Express interface for high performance voice and data applications
Half-length PRI card
RJ48 connector
Power: 1.2W Maximum
Dimension: 4.8 in*2.5 in*0.7 in
Weight: 0.11 lb.
PRI Switch Compatibility
EuroISDN (PRI or PRA) - Q.931/Q.921, Network or CPE, AT&T 4ESS, National ISDN 2, CAS Voice Modes, DMS 100, Lucent 5E.
Operating Systems
Linux (all versions, releases and distributions from 1.0 up).
Minimum Hardware Requirement
800-Mhz Pentium III 128MB RAM Available PCI Slot.
RoHS compliant Certificates: CE and FCC
Certified by trixbox CE and Elastix.