Noyafa NF300 Network coax cable tester LAN Network telephone cable tester RJ45 RJ11 Cable Continuity Tester in

Function description: 1, can measure cable, BNC cable open circuit, short circuit, cross, reverse connection, connection and disconnection paired cable positioning, and on the LCD visual display. 2, on cable for crosstalk test, solve the potential fault suman. 3, by the open circuit method of measuring cable, BNC control the length of the line, can measure the cable length of 2500 meters, the measuring cable length and break positioning accuracy reaches 98%. In 4, switch, router boot charged condition for line. Need the target line accuratelyfound in numerous cable. 5, the host voltage is very low (less than 6V) with low voltage prompt function.With night illumination function. 6, storage, memory and retrieval function, convenient for users to use and calibration. 7, self checking function, can automatically compensate the variation of the battery power, the influence of environmental temperature change. 8, language, system settings and backlight brightness adjustable function. SCMwatchdog software design, reliable operation. Technical indicators: (1) power: the main tester: 1 9V laminated battery; receiver: 1 9V laminated battery. (2) the test cable type: ordinary metal line STP/UTP E5 6E network cable,telephone line, BNC line and monitoring the crocodile clip link. (3) the detection line type: ordinary metal line STP/UTP E5 6E network cable,telephone line, BNC line and monitoring the crocodile clip link. (4) the working environment temperature: -10 degrees centigrade ~ +60.Humidity: 20%-70% (5) test instrument interface: The main tester: RJ45 (M) line interface, RJ45 (S) line interface, RJ11 interface,BNC interface, USB interface; Remote identifier: RJ45 interface, BNC interface. (6) the length measuring range: 1-2500 meters; line range: more than 2000 meters (7) line sequence and cable fault testing: fault detection, open circuit, short circuitand reverse connection, cross and crosstalk.