Neon Blue Watch Screwdriver Tweezers Demagnetizer Degausser Watch Repair Tool Kit for Watchmaker (Demagnetizer + Compass)

Specifications:
1. Type: Watch repair tool
2. Color: Blue
3. Dimensions 110 x 57 x 32mm
4. It can work in both 110v and 220v( Please advise the voltage that you needed when you place the order)
5. Plug: US plug

Operation:
1. Place the tool or movement in the operation field, hold it with your hand about 2-3cm above the demagnetizer area ( to be suspended ).
2. Press the button, then the instrument lights up. The demagnetizer begins to Work.
3. Please hold the tweezer or screw in the direction from left to right, up and down for 5-10 seconds ( about 2-3cm above demagnetizer area)
4. Then release the button, please check if you could get the desired effect. If not then please wait some time about several hours, please try again until the dessired effect has been achieved.

Note:
1. Do not put the watch back directly on top of the demagnetizer porcelain, must be suspended.
2. Do not hold down the red button, it would burn the instrument.

Compass Function:
1. Can be used for the detection of watch whether is magnetized.
2. Ensure there is no magnetic source (mobile phone, speaker, bank cards and other common magnetic material) is around compass in 50cm range.
3. When compass is completely static, let watch gently across on the compass.
4. If the pointer is obviouly moving, which means your watch has been magnetized. After demagnetization, pointer does not move or slightly moving, which means a normal phenomenon.

Package Contents:
* 1 X Neon Watch Demagnetizer Tool
* 1 X Compass