Neewer Z1-Rider 3-Axis High-precision Handheld Steady Gimbal PTZ Camera Mount Built-in Independent IMU Module Stabilizer for Gopro Hero4 Session 4 3+ 3 2 1 Xiaomi Yi SJ4000 SJ5000 SJ6000 SJ7000
Type
Price
Date
Current Price
Out Of Stock
2023-12-26
Highest Price
-
-
Lowest Price
-
-

Neewer Z1-Rider 3-Axis High-precision Handheld Steady Gimbal PTZ Camera Mount Built-in Independent IMU Module Stabilizer for Gopro Hero4 Session 4 3+ 3 2 1 Xiaomi Yi SJ4000 SJ5000 SJ6000 SJ7000

Specifications:

Working voltage: 8.4V

Working current: 120mA

Battery Capacity: 900mAh

Tilt Working Angle:-180 ~ 180°(vertical handheld)

Roll Working Angle: -45°~ +35°

Heading Working Angle (vertical handheld): -150 °~ +150°

Heading Working Angle (leveled handheld): -50°~ +50°

Max Battery Operation Times (25°C, 2*900mAh): 5h

Operation Temperature: -20°C ~ +45°C

Weight: 285g / 10oz

Line Length between Handle and gimbal: 59" / 1.5m


Three operation modes:

When in Locking Mode, the indicator light up. Pitching and roll are locked.

When in Heading Following Mode, the indicator blink slowly. Pitch and roll are rocked. Heading rotates smoothly follow the direction of the handheld.

When in Heading and Pitch Following Mode, the indicator blink quickly. Roll is locked. Heading and pitch rotate smoothly follow the direction of the handheld.


Operation:

Mode Switch: In working mode, press "MODE" to switch Heading Following Mode / Locking Mode. Press "MODE" 2 times to turn on Heading and Pitching Following Mode; press "MODE" again to turn on previous mode.


Note: In following situation, please do calibration again. (Procedures shown on the manufacturer's website)

1. Opening the handheld gimbal with horizontal deviation.

2. Not using the handheld gimbal for a long time.

3. The emperature variation change too much.

Please don't operate the handheld gimbal over working range.


Package Contents:

1 * 3-Axis Handheld Gimbal Camera Stabilizer

1 * Camera Holder

4 * Screws

2 * 18350 LIPO Battery

1 * Battery Charger

1 * USB Cable

1 * Warranty Card

1 * User's Manual

  • TitleNeewer Z1-Rider 3-Axis High-precision Handheld Steady Gimbal PTZ Camera Mount Built-in Independent IMU Module Stabilizer for Gopro Hero4 Session 4 3+ 3 2 1 Xiaomi Yi SJ4000 SJ5000 SJ6000 SJ7000
  • BrandNeewer
  • ManufacturerNeewer
  • BindingElectronics
  • ProductGroupCamera
  • ItemPartNumber10084548
  • Model10084548
  • Size18*13*10 decimeters
  • UPCs808018112308
  • EANs0808018112308