Neewer® B&R 1 for 2 Speed Control Y-Harness Standard Battery for RC Helicopter (Brushed Speed Control)


*This equipment used in electric model car, and according to the following the information of choice scope configuration.
* Add the latest simulation brake technology to improve stability, still can effectively eliminate the brake carbon brush and rotor caused the spark between extend the working life of the motor carbon brush.
*Low voltage protection function will be the average battery low voltage to 5 V off short electrode output and prevent damage to the battery or affect peripheral electronic equipment.
*Tiny volume but it can provide abundant power, their own internal impedance of just 0.0013 ohm.
*Electrical parameters: support: the nimh nickel cadmium battery 4-6 group, the biggest 7 group (4.8-8.4 V).
*Was the plugin current: 1 A.
* 1, the right and power supply battery connection at both ends, a small red line is positive, black is negative. (or connection standard DC battery plug).
* 2, turn on the power switch, if the fact that no signal input motor will be issued a "beep beep beep ~ ~ of the alarm sounds." When have the normal signal into the alarm sound will stop.
* 3, open the remote control, adjust the fine-tuning into a green light, in red out shall prevail. Kids into a green light hand zhi at this time for moving forward, the hand again back more than for the sincerity and into the brake, back to pull the state by the more tightly. Hand in the back a longing to back a reverse and into the state with a red light about 550 motor.
*Note: ban into the water and power are aligned reverse connect.

Package Contents
* 1xRC VSC 320A Brushed Speed Control