NEW CHROME VEGA MANUAL STEERING BOX WITH CHROME PITMAN ARM & WELD-ON MOUNTING BRACKET, GM 140 CROSS STEERING GEAR BOX, STREET ROD, HOT ROD, RAT ROD,COMPATIBLE WITH 1923-1948 FORD, T-BUCKETS, MODEL A
Brand New Chrome Vega 140 GM Manual Steering Box, Chrome Pitman Arm, and Weld-on Mounting Bracket (Part # 105-3010, # 107-1447, and # 105-7970).
These are brand new parts produced by
Southwest Speed.
Features:
Vega GM Manual Steering Box: - Chrome-plated housing
- Steering Shaft Spline: 5/8"-36
- Ratio: 20 : 1
- 5 1/2" Turns (Lock-to-Lock)
- Mounting pattern is 2 3/4" and 4 3/8" center-to-center of the three mounting holes
- This is the stock configuration, meaning when you turn the input shaft clockwise, the output shaft also turns clockwise
- Recommended for vehicles weighing 2800 lbs or less
Pitman Arm: - Chrome-plated
- Non-offset design
- Double-tapered "Ford" tie rod end hole allows you to attach the drag link on the top or on the bottom
Measures: - 6 3/8" Center-to-Center
- 7 7/8" Total length
- Tapered tie rod hole measures 0.625" on both sides and tapers down to 0.585" in the center of the hole
Mounting Bracket: - This is a weld-on bracket
- The upper bolt hole is threaded 7/16"-14
- The two lower bolt holes are drilled straight-through to accept a 7/16" bolt
- This allows the bracket to be mounted in many different applications
Fits:
- These boxes are perfect for the cross steering system in hot rod applications with straight axle setups: including Street Rods, Rat Rods, Hot Rods, T-Buckets, Model A's, 1923-1948 Fords, and many other vehicles:
- You can see a better description of "Cross-Steering" in the diagram shown in the images.