It is 2 phase. 1.8° Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.
Can be Customized for Winding Current, Shaft Options, Cables and Connectors.
Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects.
The driver supply voltage up to +50VDC, Output current up to 4.2A.
15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal.
Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating.
The first three switch (SW1, SW2, SW3) of the DIP switch are used to set the current. Select a setting closest to your motor's required current. Microstep resolution is set by SW5, SW6, SW7, SW8.(0FF=0.ON=1)
chopping technique, it can output more speed and power from the same motor, compared with traditional drives such as L/R drives.
Enter the website for more information: http://54.235.23.96/watch_images/57HS56A4ZH.jpg
Branduxcell
EAN0700724944856
Labeluxcell
Manufactureruxcell
MPNa14031100ux0073
PartNumbera14031100ux0073
ProductGroupBISS
ProductTypeNameCUTTING_TOOLS
Publisheruxcell
Studiouxcell
TitleNEMA23 2 Phase Mill CNC Stepper Motor 76mm 3A 255oz.in w MB450A Driver
