Motion Sensor Switch, Sensky BS019 AC 110V Motion Sensor Light Switch, Ceiling Mounted Occupancy Sensor Switch for Corridor, Toilets, Garage and Staircase

Motion Sensor Switch, Sensky BS019 AC 110V motion sensor light switch, Ceiling Mounted occupancy sensor Switch for corridor, toilets, garage and staircase

This PIR sensor switch detects PIR body heat and automatically switches the light on, and turning it off again after a time adjustable from 5s-300s. It is supplied by 110VDC power, internal without batteries, multiple application wired ceiling wall sensor switch.

Attention:
1. When the ambient light is bright enough, this motion light switch would not be triggering, the light stays off. If you need it to induce in daylight, you need to adjust it to daylight induction mode.
2. Install the sensor switch following the wiring diagram, please connect the power supply after the careful check. 40 ~ 80seconds is needed for preheating.
3. Detecting will be affected by the environment and other factors, such as temperature, walking speed, cloth, etc.
4. In order to keep the high sensitivity, please do not install the product in a strong light environment or where there is strong cold or heat airflow.
5. This device has the function of repeat triggering, when people into the detecting area, triggering the switch, the device will restart the delay time, so the delay time should be calculated on the last triggering.

Specifications:
Operating power supply: 110VAC
Capability of load: max 200w
Environment temperature: -10 degree ~40 degree
Delay time: 30~300secs (adjustable)
Detecting distance :3~10 m
Detecting angle: 360°
Lighting detecting range: 10lux~500lux (adjustable)
Height of installation: 2.2-4m
Dimension: 3.5*3.5*1.4 inch