Monoprice Ultra Slim Series 3ft 10.2Gbps High Performance HDMI Cable w/RedMere Technology Supports Ethernet, 3D, 4K and Audio Return - White

A High Speed HDMI Cable with Red Mere from Monoprice is the best way to transmit your High Speed HDMI signals over the longest distances while using the thinnest cables possible! Red Mere technology is a breakthrough in the functionality and efficiency of HDMI cables. High Speed HDMI Cables with Red Mere can reliably distribute High Speed signals to much greater distances up to 65 feet (20 meters) at the full 10.2 Gbps data throughput as opposed to the 25 foot distance for HDMI cables without Red Mere technology. This can be done with thinner and lighter cables which are easier to handle and route through your home theater system and which put less stress on your equipment's HDMI ports. Normally a cable of this length would require minimum 28 AWG conductors to support High Speed HDMI features but the Red Mere chip in this cable allows it to support all High Speed HDMI features with only 36 AWG conductors. The connector heads measure a mere 5/8" wide and 1/4" thick. The connector head at the source is only 9/16" long while the connector head at the sink (TV) which houses the Red Mere chip is only 13/16" long. Note that HDMI Cables with Red Mere are directional. One end must be connected to the source device (e.g. Blu-ray player) and the other end to the sink/display (e.g. HDTV). Hooking them up backwards will not damage anything they just won't transmit a signal. Also note that these cables are fully compatible with switches splitters matrix devices etc. They can be used in any application in which a normal HDMI cable can be used and many applications where HDMI extenders would otherwise be required! Monoprice HDMI Cables with Red Mere include several features that separate them from other cables with Red Mere. The connector heads are fully shielded with zinc alloy which helps prevent RFI and EMI from interfering with your HDMI signal.