Miracle Sealants Grout Shield, 70oz

Miracle Grout Shield is a specialty sealer additive, made to replace water in mixtures with cement-based grout. By taking inconsistent tap water out of the equation, Miracle Grout Shield is able to create a consistent and more durable product with superior color quality. It is anti-microbial-a fungistatic agent has been incorporated into this product that will make the grout more resistant to staining caused by mildew.Directions:Use with 25lb. bag of sanded grout.Shake well before using. Pour entire Grout Shield contents into a clean mixing bucket. Slowly add entire bag of sanded grout and thoroughly mix (drill, grout mixing bit & bucket). Let sit in mixing bucket for 10 minutes and then mix again. Follow grout manufacturer's instructions to install grout. In order to maintain color consistency across an entire installation, use the same liquid to grout proportions when using multiple containers for the same job.Inspect and rework grout joints if necessary during final cleaning.Special Notes:When using Grout Shield stain resistant grout additive, grout doesn't need to be sealed. If tile or stone needs to be sealed, do so before grouting with Miracle Sealants 511 Impregnator as your grout release. Avoid applying sealer to tile/stone edges as this may interfere with proper grout bond. If enhancing tile and/or grout, use Miracles Sealants Seal & Enhance as your grout release. Do not use Grout Shield additive with cement grouts that already claim stain resistance, or with liquid, ready-to-use or epoxy grouts. Certain tile surfaces, including glazed ceramic tile, marble, stone and agglomerate tile can be scratched, stained or damaged when grouted with sanded/colored grout. Follow tile manufacturer/fabricator recommendations and test a small area prior to use to determine suitability. Not recommended for installations where chemical resistance is required. Never mix Grout Shield additive with latex additive or any other additives.