Mid Size Slayer Exciter Tesla Coil Made in USA
WIRE COLOR MAY VARY FROM ABOVE PICTURE. This is a Mid Size Slayer Exciter Tesla Coil. This Slayer Exciter Tesla Coil comes as pictured above with the coils wound and the circuit assembled on the breadboard. All that is needed is put the L1 pancake coil around the L2 coil and connect it to the breadboard(L2 connects to the red wire on the breadboard row 29 J,H, or G) and connect the battery holder.Runs from 1.5 volts to 20 volts, pictures show running at 18 volts. This also comes with three circuit diagrams a parts list and a certificate of authenticity signed and dated by me the inventor of the Slayer Exciter circuit. The L1 coil is a 5 turn pancake coil. The L2 coil is 1 1/2 by 7 1/2 inches tall with 5 3/4 inches of 34 gauge magnet wire. The Extra components are. 1=High Quality Breadboard with one of the circuits assembled in it 1=100k resistor 1=1M resistor 1=veritable resistor 1=500 pf capacitor 8=assorted test jumpers 3=2N2222 transistors 1=TIP 41c transistor 1=TIP 42c transistor 2=UF4007 diodes 4=1N4148 diodes 1=Heatsink 1=AA battery holder 1=9v battery holder 2=clip leads 2=LED's 3=circuit diagrams 1=LED connected to an AV plug for testing