MakerJuice Unpigmented SF UV 3D Plastic Printing Resin for SLA and DLP Printers (one 500 mL bottle).
Available in White, Black, Red, Yellow, Green, Blue, Unpigmented SF is a great blend that is just slightly more bendy than G+, while maintaining the fast print speeds and great accuracy. It also has a higher pigment concentration, for more vibrantly opaque parts, and due to the higher viscosity pigment does not settle out as fast. SubSF is perfect for snap-fit parts, or anything that needs to be hard while not being brittle. SF, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don't need much power. This resin is low odor and contains zero VOC. Each batch of resin we make is quality tested to ensure you get the best quality resin, at a great price! The color has been digitally changed to match the resin color. Colors may appear different depending on your monitor settings and and lighting. All models shown have had pigment added because pigment is necessary for the models to print and cure properly.