Magnate M93.5G12MC Carbide Grit Bandsaw Blade, 93-1/2" Long - 1/2" Width

The picture depicted represents one blade; the pricing is for one blade/package. A tungsten carbide particle grit bandsaw blade is ideal for cutting abrasive and hardened materials like wire reinforced rubber, steel belted radial tires, ceramics, fiberglass, composites, hardened steel, cast iron (grey with voids), graphite and case hardened materials. For applications greater than 1/4? (6.4mm) in cross-section and use with wood cutting bandsaws. ( Metal cutting bandsaws are not recommended due to much lower speed ) There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 93-1/2 inch ( 7 ft. 9-1/2 inch, 7' 9-1/2" ) bandsaw blades suit the following models: Craftsman Professional 7? x 12?; Delta 28-203, 28-243, 28-245, 28-283, 28-303; Grizzly G1019, G0580X; G0555X (92-1/2" to 93-1/2"); General International 90-125 M1; Jet JWBS-14DX, JWBS-14CS,JWBS-14OS; JBS14-MW, JBS14-14CS, JBS14-140S; Chicago Industrial 14"; Reliant 14"; Central Machinery 00580-OBME; Elephant 14"; Rikon 10-315; PowerMatic PWBS-14CS; Enlon Brigewood; RIKON 10-320; If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.