MINILAB-1008 8 Channel DAQ Device

The miniLAB 1008 from Measurement Computing is a low speed USB device that features 8 12-bit analog input signal connections and 28 digital I/O connections.

2 screw terminals rows provide connections for 8 analog inputs, 2 10-bit analog outputs, 4 bidirectional digital I/O lines, and 1 32-bit external event counter. You can configure the analog input connections with software as either 4 single-ended or 8 differential channels. All analog connections terminate at the screw terminals. 24 bidirectional digital I/O lines are also available on a 37-pin connector.

An on-board industry standard 82C55 programmable peripheral interface chip provides 24 digital I/O lines that terminate at a 37-pin connector.

The miniLAB 1008 is powered by the USB port on your computer. No external power is required.

Each Purchase of the MINILAB-1008 includes InstaCal Software, TracerDAQ Software, ULx for NI LabVIEW Drivers and 2 Meter USB Cable.

Specifications
Number of Channels: 8 Single_ended or 4 Differential (Software Selectable)
Input Range: +/- 10 Volts (Single-Ended Mode); +/- 20 Volts (Differential Mode)
Input Range (Linear Operation): +/- 10 Volts Max (Single-Ended Mode); - 10 Volts Min, +20 Volts Maximum (Differential Mode)
Resolution: 11 Bits (Single-Ended); 12 Bits, no missing codes (Differential) Throughput: 50 S/s (software paced); 1.2kS/s (Continuous Scan)
Power Source: USB Port (No External Power Connection)
Interface: USB