M-Factors Storage 128GB mSATA Mini (Half Size) SATAIII Made in Taiwan Final Test in USA

The SSD provides all the advantages of flash disk technology with the Serial ATA III interface and backward compatible to support SATAII specification.

mSATA Mini SSD module is based on JEDEC mSATA Mini (MO-300b Variation B) form factor.

It is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal.

Available capacity ranges from 4GB to 256GB.

It can reach up to 500MB/s (Sequential Read) and 180MB/s (Sequential Write) throughput based on ONFI/Toggle NAND (with DDR3 cache enabled).

The power consumption of mSATA module is much lower than traditional hard drive.

Its small foot print is ideal for space constraint embedded systems. Interface: SATA 6Gbps and 3Gbps, 1.5Gbps interface; ONFI2.0 and Toggle2 Interface support; Bus Width: 8/16 bit;

Electrical: Support 1.8V & 3.3V (support 1.8V ONFI Flash, 3.3V conventional Asynchronous Flash;

Power Dissipation: Idle - 85mA (Sleep 15 mA) operation - Read 850 mA, Write 600-750 mA;

Dependability: Write life - 20year(500G/day,32GB); Read life - Unlimited;

Time of data storage - 10year;

MTBF - 2,000,000 hours;

S.M.A.R.T support;

Bad-Block Management

- Advanced bad sector management algorithms;

Wear-leveling

- Static and dynamic wear-leveling algorithms;

ECC

- Built in hardware ECC circuit (up to 72bit/1KB);

Storage temperature:

-55~95℃;

Operation temperature

- Standard 0~70℃;

- Industrial -45~85℃;

- Extended -55~95℃;

Impact - 20G;

Shock - 1500G/0.5ms;

Humidity - 95% under 55C;