Linortek Fargo R8 TCP/IP Web Relay Ethernet Relay Remote Control Board with Built in Web Server 8 Relay Outputs Remote Power Switch, Sprinkler System Controller, Watering System Controller, Garage Door / Gate Opener

This is our 2nd generation of Fargo R8 TCP/IP web-based remote control board. Compared with the first generation, the G2 board has the same design,with improved circuits, added battery backed RTC, new SSL encoder, more schedules (16 schedules which are constructed as IF ... THEN statements, allowing you to use the relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations). Fargo R8 is a TCP/IP web enabled relay control board with a built in web server. The simplest of Fargo. Fargo R8 has eight relay outputs, you can turn on/off up to eight devices individually with our easy-to-use web page or iPhone & Android Apps remotely. As part of the software there is a built in scheduler and you can also control the board thru RESTful commands. This provides quick access to setup and manage your devices. Fargo R8 is an all-in-one system. Everything needed to run the product comes with it. All data is stored in the built in web server, no central unit or server needed, no additional software or programming required. Fargo R8 is ideal for applications that require web control. Virtually anything that you can turn on and off, any button you can push can be controlled by Fargo R8. You can use Fargo R8 for applications such as industrial control, door/gate control, irrigation control, lighting control and much more. The uses are only limited by your imagination and ability. Fargo R8 smartphone Apps allow you to add new relay boards when you need to grow your system, this makes it easy to manage all your devices in one place.