Light Bronze Tremco DyMonic FC Polyurethane Sealant

Color: Light BronzeContents of Cartridge : 10.1 fl oz (300 ml)Shelf Life: 9 MonthsPallet Quantity: 1800Fast Skin Time, Less Dirt Pick UpPrimerless Adhesion on Most Common Construction SubstratesRegular DyMonic Available in Sausage Packs Sealant Estimator ChartCRL Tremco DyMonic FC is a fast skinning, high performance, low modulus, one-component, moisture curing, polyurethane sealant. DyMonic FC features a smooth, consistent surface when cured. It requires no priming when used on most common substrates, provided surfaces are dry, clean, and free from contaminants. It is supplied in a non-sag consistency which will gun easily with conventional caulking equipment. Because it skins in only one hour at 70F (21C) there is less dirt pick up compared to other polyurethane sealants. Regular DyMonic typical skin time is 16 hours at 70F (21C).Basic Uses:DyMonic FC can be used to seal dynamic moving joints in precast concrete panels, curtainwall, and tilt-up panels. Also for expansion and control joints, perimeter caulking of windows and doors, bedding of mullions, frames, and panels. It develops a strong adhesive bond that will not deteriorate, and exhibits excellent weather resistance. Its balance of properties (high strength, low modulus, high recovery) makes it able to withstand moisture, shear, and deflection movement. Dymonic FC exhibits a tenacious adhesion which will not diminish over product life.Technical Data:Meets U.S. Federal Specification TT-S-00230C, Type II, Class A; Canadian standard CAN/CGSB-19.13-M87; and ASTM C 920, Type S, Grade NS, Class 50 (DyMonic FC) Class 25 (DyMonic), Use NT, M, A and O.Limitations:Do not apply to damp or contaminated surfaces. Some substrates may require priming, such as certain high performance paints and architectural finishes. Painting over DyMonic is not a recommended practice since paint may crack and peel when joint movement occurs. Check cartridge label and Specification Data Sheet for additional limitations.Comparable