LemonBest New 5E 6E SC8108 CAT5 RJ45 Network LAN Length Cable Tester Meter Gray

The tester will automatically detect far-end matcher (ID) or local port (L) cable and displays if the far-end of cable to be checked does not insert into the far-end matcher (ID) or if the cable does not insert into the local port (L) in local test. This network cable tester instantly check your LAN cable wiring for proper continuity, shorts, and pair integrity. Test results are digitally shown via its LCD and it instantly displays the exact configuration of the cable. It performs line test without requiring the external adaptor. With single board computer software watchdog design and reliable operating time. This covers wide array of applications such as cable connection sequence, length, user jumper or crossfire, cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference.

Specifications:
Type of Tester Cable: STP/UTP twin twisted cable, coaxial cable, telephone line Tester Port
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
(BNC and RJ11 converters (not included in the set), can be used to measure and check the continuity of coaxial cable and telephone line)
Length Measurement of Twin Twisted Cable:
Scope: 1 to 350M (3 to 1,200 FT) calibration
Calibration accuracy: 3% (0.5m or 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (0.5m or 1.5 ft) (AMP, AT&T Class 5 cable)
The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error:
Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference
Included 1 far-end passive test jack
Power: 4 x AAA batteries(Not included)
Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes
LCD size: 2.6"
Product size: 180x82x40mm
package:1 x Multi-Network Cable Tester; 1 x Far-End Test Jack; 1 x Instruction Manual