Lanyu 60A Brushless ESC for RC Helicopters Airplanes Multi Rotors

Lanyu 60A Brushless ESC for RC Helicopters Airplanes Multi Rotors Description: Size:70 x 31 x 14mm Output capability:Continuous current 60A- short-time current 80A (less than 10 seconds); Power input:2-6 cells lithium battery or 5-18 cells NiMH / NiCd battery pack; BEC Output: tarot-60A: 3A (Power Supply mode-switch mode) tarot-60A-OPTO: None Maximum speed:2-pole motors 210 000 rev/min- 6-pole motor 70000 rev/min- 12 pole motor 35 000 rev / min; Weight:tarot-60A: 60g (including heat sink) tarot-60A-OPTO: 56g (including heat sink) Safety Arming Feature:When power is turned on- regardless of the throttle stick position- the motor will not start immediately- to avoid injury; Throttle Calibration function:Adapt to different remote throttle differences- improve throttle response linearity; Programmable Items: Brake Settings: brake enabled / brake; Battery Type: Li-xx (lithium battery) / Ni-xx (Ni-Cd or Ni-MH); Low Voltage Protection Mode: reduces power on / off output; Low Voltage Protection Threshold: low / medium / high; Boot mode: Normal / Soft / Super-Soft startup; Timing: low / medium / high; Restore the factory defaults; Comprehensive protection functions: Undervoltage protection: set by the user through the process- when the battery voltage is below the protection threshold- the ESC automatically reduce the output power; Overvoltage protection: input voltage exceeds the allowable range will not start- automatic protection- also issued a rapid "beep beep" alarm sound; Overheat protection: Built-in temperature sensing circuit- MOS tube temperature is too high- the ESC automatically turn off; remote control signal loss protection: remote control signal is lost one second after power down- then there two seconds to turn off without the remote control signal output; Features: Ultra-low power input impedance using military large-capacity electrolytic capacitor- which greatly improve anti-jamming capability; Control circuitry and power tube