LOTOS LT6000 60 Amps 220V Pilot arc Plasma Cutter with longer plasma cutting torch, integrated regulator/filter and FREE mask with 3 year warranty

Lotos LT6000 is a 60A single phase 220vac Digital Inverter Pilot Arc Plasma Cutter with CNC cutting feature. 3 Years Warranty on Parts and Labor from Lotos California or other Authorized Lotos Dealers/Repair Centers. Input Voltage: 200~240 VAC Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz) Insulation Grade: B Housing Protection Grade: IP21 Size: 20'' L x 8'' W x 12.5'' H Weight: 43 lbs (50 lbs with box and footpedal) Accessories: LONGER Pilot Plasma cutting Torch (16 ft) (the latest version has longer cutting torch, you can cut everywhere) 5 Pcs 60A Lotos Plasma Cutting Consumables (included 3 pcs consumables installed on the torch head) Air Filter/Regulator integrated with the machine (check the picture), adjust the compression from front panel. Ground Clamp & Cable (9.5 ft) Air Connections, (9.9 ft Air Hose and two clamps.) Plasma cutting mask and brush cleaning kits. User Manual. 220V Power Plug installed. Quick Setup Guide helps customer to setup unit less than 10 mins. Cutting Specs: 1" Severance Cut, Maximum load 5/8" Ideal Normal use 3" Per minute @ 1" Steel (Severance Cut) 11" Per minute @ 3/4" Thick Steel 17" Per minute @ .5" Thick Steel a pilot arc plasma cutter which is a good feature for customers who need to cut rusty material (In a pilot arc torch, when you press the trigger of the torch, the machine will automatically strike an arc, you don't need to remove the rust before cutting. For contact arc cutters, like the LT5000D, all the rust must be cleaned off in order to cut the rusty material. In addition, in cases where the torch cannot touch the metal, such as the corner piece of a metal frame, you will need to use a pilot arc cutter as a contact arc (as the name implies) requires contact. 90% of all our business customers have purchased the LT6000 over the LT5000D.