LEORX Nema 17 2 Phase 4-Wire 1.5A 40mm 1.8° Stepper Motor for 3D Printer

Description

This item is a stepper motor, with 4 pin cable for convenient use, suitable for 17HD34008-22B mixing type stepping motor. Necessary replacement for 3D printer.



Features

- 1m wire to connect an electrical machine, on the other hand has several optional connections; To prevent shrink tubing effect that the wire gets tangled up D-shaped shaft with 22mm, electric machine with high torque and high speed, low noise.

- Suitable for mixing 17HD40005-22B stepper motor.

- Drive mode: Hack wave constant current drive.

- Exciting mode: two-phase 4-wire. It is available for the rotation of the forward and reverse.



Specifications

- Ambient temperature: -20 50 ℃

- RH: 90% max

- Mounting position: shaft horizontal or vertical installation

- DC winding resistance (25 ℃): 1.6 Ω ± 10%

- Wnding Inductance: 3.2mH ± 20%

- Cogging torque: 18mN.m REF

- Holding torque: ≥ 360mN.m (I = 1.3A)

- Max Blank switching frequency: ≥ 1400pps

- Max Idle Frequenc :. ≥ 8000pps

- Temperature rise: lt;80 K

- Step angle accuracy: 1.8 ° ± 5%

- Rotational inertia: 57g.cm 2

- Motor Weight: 0.28 kg / pcs REF

- Insulation resistance: Cold insulation resistance should be more than 100 mOhm (between the motor stator and terminal)

- Dielectric strength: The space between the motor stator and terminal should withstand able AC600V / 1s without degradation. Leakage current of less than 1 mA.

- Size (L * W * H): ca. 42 * 42 * 40mm / 1.65 * 1.65 * 1.57 inch

Package Including

1 * Nema 17 2 Phase 4-Wire 1.5A 40mm 1.8° Stepper Motor for 3D Printer

1 * Cable