LEDENET DC 24V 12 Watt Wall Adapter Power Supply 2.1mm 5.5mm Plug

UL listed high quality 24V 0.5A Power Supply for your LED light and many other purpose use.


Input Voltage: 100-240V AC
Input Voltage frequency: 50hz, 60hz
Output Voltage: 24V
Output Voltage Range: Minimum 22.8V, Maximum 25.2V
Output Current: 500mA
Cord Length: 1.8 meters
Connector: 5.5mm Outside Diameter, 2.1mm Inside Diameter, 10mm Long, Center positive.
DC Cable: 20AWG 2464 L1800mm±30mm Tuning fork in+/out-,SR4*7.
Minimum Efficiency: 78% 115Vac input and output at typical full load.
Over Voltage Protection: The power supply will be auto recovered when faults remove.
Over Current Protection: The maximum constant current would be greater than 0.6A and less than 3A;The power shall be auto-recovery.

Short Circuit:
Output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heat happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed).

Note: Standard power supply tip sizes are (OD - Outside diameter, ID - Inside diameter): 5.5mm OD/2.5mm ID, 5.5mm OD/2.1mm ID. This power supply comes with a 5.5mm OD / 2.1mm ID tip.

Package Included:
1pc * 24V DC 12W adapter (UL listed)