LEANINGTECH Expansion Board for Raspberry PI B+ Designed for Ease of Use Components SX300

Leaning Tech expansion board is directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required, and duplicated the 40-pin header of the R-Pi in order to support existing expansion boards. X300 Raspberry Pi Expansion Board Adds Bluetooth, Microphone input, stereo audio output, Wi-Fi, RTC, IR receiver, SATA and More. Features: This expansion board is suitable for Raspberry Pi Model B+ RTC based on DS3231SN with CR1632 backup battery The SATA port allows you to connect SATA devices to your Raspberry Pi Supports Bluetooth serial communication, Wi-Fi (IEEE 802.11b/g/n) with antenna, IR sensor (38KHz) Have DIP switch to remove connection from RPi's pin header so as to keep using other expansion board with no effect Have 3.5mm MIC in jack, 3.5mm stereo audio jack, Audio IO connector, SPDIF output, audio IO connector (Microphone input and stereo audio amplifier 2x3.3W) Note: Know more instructions through the following link or you can feel free to contact us: suptronics.com/Xseries/x300.html Package Includes: 1X X300 expansion board 1X USB adapter 1X 2.4GHz WIFI antenna 4X nylon spacers (M3 x 20mm) 8X nylon screws (M3 x 6mm)