Kosmic Kolor Urethane Klear 1 Pint House Of Color Uc35

House of Kolor UC35 POLYURETHANE ENAMEL KLEAR may be used to topcoat any urethane or polyurethane enamels, and any SHIMRIN® Base Coat color. It gives a high-gloss, has excellent weathering and UV resistance. This polyurethane enamel klear dries fast and hard, and can be colored sanded and buffed the next day. UC 35 Clearcoat mixes 2 parts Clear to 1 Part Hardner(KU150) and 1 part RU Reducer (RU310, RU311, RU312) and all can be ordered below. APPLYING Kosmic Klear (UC35) Apply 2-3 medium wet coats with 50% pattern overlap. Gun distance while spraying should be approximately 6 inches. Allow flash time between coats. URETHANE FLASH TEST - PAINT SHOULD BE STICKY AND NOT STRING WHEN TOUCHED AT THE WETTEST POINT BEFORE NEXT COAT IS APPLIED. (When using the flash test, always touch a new spot.) Monitor closely for maximum merging of coats. NOTE: Waiting too long between coats can cause re-coat problems. If excessive dry time has elapsed and clear coat feels dry to the touch, allow 12 hours before sanding and re-coating to avoid lifting problems. NOTE: Over spray from any catalyzed topcoat material (such as our UB04, UB05, UK Kandys, UC35 Klear or UFC19 Komply Klear® II may lift when base coats are applied. Mask carefully to prevent this over spray when painting door jambs, etc.