Klone-It Turbo Engineered Stone Resurfacing Kit
This is the Klone-It Turbo Engineered Stone Resurfacing Kit and this is just what you need. This kit is designed for removing scratches on engineered stone and then bring back the natural "snakeskin" texture of it. In this kit you get: 3" diamond polishing pad set - 150 grit through 3,000 grit 3" Rigid backer pad 3 of the 5" wool wheels 5" Felt wheel for use with step3 5" Rigid backer pad The Klone-It chemical compounds. Instructional Sheet You will need to provide a low speed polisher or a variable speed grinder and 3 buffing wheels. The diamond polishing pads are to be run wet to dry to remove the scratch and polish out the stone. Then you use the compounds as instructed in the instructions to mimic the snakeskin texture of the engineered stone. In this kit you get all 4 compounds needed to perform this task. You get 4 ounces of compounds 1, 2 & 4 and 6 ounces of compound 3 (since you will use more of this compound). This is enough to successfully repair 6 - 10 spots of texture where the size of the spot is the same as the size of a top polished scratch repair area. This kit is made for the professional. If you cannot top polish this will not fix your mistakes! This is a HazMat (hazardous material). It can only be shipped via UPS Ground Delivery to the continental USA or UPS Standard Delivery to Canada. It is not able to be shipped via any other level of service or outside of the continental USA and Canada. Ships to CONTINENTAL U.S.A. and Canada only-- it is not available for delivery to Alaska or Hawaii.