Kirby Vacuum Cleaner Inner Cloth Bag Hose Fill Tube Fits Sentria Ii & Late G10

GENUINE KIRBY This is the tube that carries the dirt to the paper bag on late Sentria Models that came with the one piece emtor. This fits all Sentria II. This tube is very dependable, but we humans do break things. This tube will not fit the G3, G4,G5, G6, G7, or early Sentria with the two piece Emptor. This tube has a larger diameter on the end that fits the emtor. The top adapter end is the same size as the G6 and newer fill tubes. Instructions: To remove the old fill tube,. With a pair of wire cutters cut off the ends of the ties. and pull the old snap fill tube from the emtor and the tube top. Before installing the new tube on the emtor you may want to run it under hot water, it makes the job easier. Use a new tie (included) to secure the new fill tube to the Emtor. I use pliers to pull the tie very tight, and have never had one break. The top is installed the same way, but be sure that it faces toward the back of the Emtor before tightening the tie. Locate the tie end on the side so that it does not rub on the cloth or paper bag. Use the hose of your Kirby to vacuum the dirt from the cloth bag, do this before you reattach the fill tube top to the cloth bag strap, so that the paper bag is out of the way. Loose dirt in the cloth bag decreases cleaning efficiency of your machine. *This will not fit the early Sentria with the two piece emtor.