KingCK Audi 1 Min Easy Installation HD Car Door Logo Projector Pack of 2



KingCK High Definition Logo Projector Cast A Clear And Bright Logo On The Ground Every Time You Open The Car Door. KingCK Lights Project Brighter Light Than The OEM Light Yet Fits Just Like The OEM.
Installation Requires No Drilling, No Rewiring, Or Dissembling To The Car Doors. Total Installation Time Will Only Take 1 Minute For Each Door.
Carefully Made Metallic And Polycarbonate Body Structure Ensures Excellent Heat And Damage Resistance.

Compatibility:
Audi Models:
A8 / S8 (2004-2015),
A7 / S7(2012-2015),
A6 / S6 (2005-2015),
A5 /S5 (2008-2015),
A4 /S4 (2003-2015),
A3 / S3(2010-2015),
R8 (2007-2015),
Q7 (2006-2015),
Q5 (2010-2015),
Q3 (2012-2015),
TT (2008-2015)

Installation Instructions:

1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights;
2. Plug In KingCK Door Lights With Correspondent Connector;
3. Put KingCK Door Lights To The Spot Where Your Original Step Lights Were.
4. Bam! Done! Logo Should Be Projecting On To The Ground.

How To Change Logo Chip

1. Remove And Disconnect KingCK Lights From Your Cars;
2. You Should See A Small Handle At The Middle Of The Light;
3. Pull The Handle And Remove The Logo Chip. While Removing It, Please Remember The Original Position Of The Chip (Which Side Is Up);
4. Slide In The New Chip, At A Position The Same As The Old Chip.
5. Reconnect The Light.