Joko 500w Grid Tie Inverter for Solar Panel 14v-28v Dc -110v Ac

Feature: -Reverse polarity protection. When connected incorrect AC input, inverter will alarm to avoid damage. - The DC input will cut off automatically at night to avoid the current reverse. And it will switch on when the DC come in at daytime. - Maximum Power Point Tracking (MPPT) will optimize the power output. - Stackable (connect in parallel for higher output, and the output will not be affected by single panel) - Island protection: Inverter will shut down during black outs. - LED indicators reflect the power output rate - Grid-Tied - sells surplus power directly back to the grid at a premium rate (depends on your location) - Generates pure Sine Wave - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - Simple and safe installation - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads - Not require rewiring of existing electronics -Suitable for family used small system (panel) - Poor performance of one of the solar panels would not affect the performance of the other units in the whole System Specifications: Model GP-500W Normal AC Output Power 450W Maximum AC Output Power 500W AC Output Voltage Rang 110v or 230v, it does not both in one inverter 90v~130v,190V ~ 260V AC Output Frequency Range 46Hz ~ 65Hz Total Harmonic Distortion(THD) <5% Power Factor 0.99 DC Input Voltage Range 14V ~ 28V Peak Inverter Efficiency 95% Standby Power consumption <0.5W Output Current Waveform Pure Sine- wave MPPT Function Yes Over Current Protection Yes Over Temperature Protection Yes Reverse Polarity Protection Yes Island Protection Yes Stackable Yes Operating Temperature Range -10 0C ~ 45 0C N.W. 1.8Kg G.W 2.1 Kg Dimension 330mm*210mm*95mm Note: Generally 24v solar panel rated voltage is 36v, so pls DO NOT connect your 24v solar panel to this inverter, because the inverter input is 14-28v, otherwise the inverter will be burnt.