JVCC Bi-Directional Filament Tape [155# tensile] (762-BD): 6 in. (144mm actual) x 60 yds. (Natural)

JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only.

If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 144mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information- Core: 3 inch diameter neutral
- Backing/Carrier: fiberglass reinforced polypropylene film
- Adhesive: synthetic rubber
- Thickness: 4.7 mils (carrier, adhesive)
- Adhesion: 91 ounces per inch (to stainless steel test panel)
- Tensile Strength: 155