Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing

Main features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: 1°C (-50 ~ 70°C) / 1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~265VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~265V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC-308 temperature controller;
1x Manual

Note: This listing sensor's probe dimension is 50mm x 6mm. If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.