Indipro Dual Power Grid & XLR Audio Box with Dual LP-E6 Plates for Blackmagic Pocket Cinema Cameras

The Power Grid & XLR Audio Box with Dual LP-E6 Plates for Blackmagic Pocket Cinema Camera from IndiPRO Tools provides power to your Blackmagic Pocket Cinema Camera using two available Canon LP-E6 type batteries (not included), and converts two XLR inputs to a 3.5mm stereo audio output to provide two channels of audio directly to your camera. The Power Grid System incorporates a clamp so you can mount it to LWS 15mm support rods and it features a right angle power plug to keep the cable neat and snug on the camera. The Power Grid features a two-sided design that mounts the batteries one on each face, two batteries are required to supply the necessary voltage to power the camera. The batteries securely snap in to the plate, and you must press a small tab to remove them. A blue LED built into the plate lights up to indicate sufficient voltage to power for the camera. When used in conjunction with the camera's internal battery, you can hot swap the batteries without powering down the camera. The Power Grid System is Made in the USA. Powers your Blackmagic Pocket Camera using two available Canon LP-E6 type batteries. The unit incorporates two adapters from XLR to a 3.5mm stereo mini. This allows you to record the signal from two XLR mics in the camera via the stereo input. Integrated rod clamp for LWS (light weight standard) 15mm support rods, allows you to mount the Power Grid System in a variety of positions. Space saving battery plate that mounts available batteries, sold separately, face to face instead of side-by-side. Batteries securely snap into place, and a release tab must be depressed to remove them, which means that the batteries remain attached during normal use. A built-in blue power LED provides confirmation that the Power Grid System is supplying enough voltage to power the camera.