IMAGE® IR Extender Over HDMI--Extende up to 25m (To Be Sure to Use One 19pin HDMI Cable)

The IR extender can do IR signal extend by the CEC channel of the HDMI port. You can do control to the IR Signal source device by using the received IR (infrared) signal by the IR Receiver.

MAX operation current:15ma
Weight:35g Housing: plastic box

Operating and Connecting：
1、To use one HDMI Cable to connect the two IR Adaptor HDMI input female port.
2、To connect one of the two IR adaptor Output port with the HD Source, the other IR adaptor Output port to connect with the Display.
3、To connect one IR adaptor with the IR-RX port.
4、To connect the other IR adaptor with the IR-TX port.
Package Include：HDMI IR extender

Note:Pleas use the standard HDMI Cable. In order to transmit the IR signal over the HDMI cable, the switches on both modules must be set to the "IR" position. If both switches are set to the "CEC" position, the cable will pass CEC signals instead of IR signals, which HDMI cables do by default, so the "CEC" position is in effect the "OFF" position. If one switch is set to "CEC" and the other to "IR", neither CEC nor IR signals will be passed, so ensure both switches are set the same.

NOTE: IMAGE® is a registered trademark which is exclusively distributed by authorized sellers only on Amazon, IMAGE trademark is protected by US Trademark Law.