HotTool 15KW Water Cooled Spindle Motor Watercooled 15KW VFD Engraving Milling Mill Grind Inverter Coole Motor

Introduction

1.5kw water-cooling spindle motor and matching inverter for numerical engraving/grinding/milling PASS ISO9001 quality certification which means this item is the top quality item.Coolant circulation system can eliminated the high temperature caused by Spindle speed rotation.

Technical Parameters for Spindle Motor

1. Spec:80mm x Length:188mm

2. Power: 1.5KW

3. Voltage: 220V to 250V

4. Frequency: 400 Hz

5. Speed:8000 to 24000 R/min

6. ER11(3.175mm,4mm,6mm) collet chuck

7. Runout off: less than 0.005mm

8. Grease Lubrication

Technical Parameters for Variable Frequency Drive Inverter

1. Inpute Voltage: 220±15% (We also stock 380±15%, please contact us for item stock)

2. Output Voltage: 208 to 240VAC (analogous to Input Voltage)

3. Outpute Frequency: 0 to 400 Hz

4.Inpute Frequency: 48 to 63 Hz

5. Inpute Phase: suit for 1 phase input, and also suit for 3 phase input

6. Outpute Phase: 3 phase

7. Warranty: 2 years

Features

1.The spindle motor adopts Germany imported bearing which can make it use for three times longer useful time than ordinary spindle motor. In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time. Our Germany imported bearing can make spindle motor three times longer useful time than ordinary spindle motor.

2.MORE SPEED: 8000-24000 R/min

3.ER11(3.175mm,4mm,6mm) collet chuck Runout off: less than 0.005mm