HolidayCoro ActiDongle - Active DMX Dongle - Enttec Pro Compatible

Compatible with the Enttec Pro (excludes two-way RDM which is not used in Lighting controllers)

Full isolation (galvanic isolation) for power surges originating from DMX output line
RJ45 output, removing the need for XLR to CAT5 adapters "Active", "Smart", "Pro" output reduces the load on your PC for DMX output One full universe per dongle (512 channels). More than one dongle can be used on a PC for additional universes/channels Status lights for DMX and power DMX keep-alive signal generates DMX output when not receiving input Height: 1.4" Width/Length: 6" Depth: 2.6" Protocol: DMX512/1990 (DMX Channels 1 to 512) Default break time: 190 uSec Default Make After Break: 16 uSec Default refresh rate: 40Hz (no delay) CAT5 Wiring Output (E1.11 Standard): Signal: RS-485 PIN 1 (White/Orange): RS-485 Negative PIN 2 (Solid Orange): RS-485 Positive PIN 8 (Brown): Ground (not always required) Status Lights: Yellow/Amber: Indicates that USB power has been applied Green: Indicates that DMX output is being generated