Hobbypower 60A SL V2 T Plug Brushless Speed Controller ESC for RC 1/10 Car Truck

- Output: Continuous current 60A, burst current 380A.
- Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
- BEC Output: 6V/1.5A.
- Resistance: 0.0007 Ohm.
- Motor Supported: Sensorless Brushless Motor
- Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥5.5T, Off-Road≥8.5T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥8.5T, Off-Road≥13T;
- Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
- Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
- Weight: 32g(Without wires)

Features
- Compatible with all sonsorless brushless motor.
- Use top quality electronic components to enhance the current endurance ability of the ESC.
- Excellent start-up, acceleration and linearity features.
- With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
- With 4 steps of maximum reverse force adjustment.
- Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
- With 8 steps of timing adjustment to get the best compatibility with various of motors.
- Easily program with only one button and compatible with pocket-sized program card.
- The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

Packing Content:
1 x Hobbypower Racing 60A Brushless ESC
1 x Manual