Hifimediy T1-M TK2050 2 x 50W Tripath Amplifier TC2000 TP2050 T-AMP
This amp uses the TK2050 chipset with the famous TC2000 controller and STA505/TP2050 output stage chip. We made this TK2050 to be in the same power output category as the TA2020 and TA2022 because we think that the TK2050 is better sounding. Sometimes it might be suitable to run a tripath amp on lower DC voltage, a single 12V battery or other DC supply (in cars etc). If you need more power, look at the HiFimeDIY T1 and T2 amps which runs on higher supply voltages. 24V is absolute max for this amp The volume switch also acts as a on/off switch. There is an indication light on the board close to the volume switch, it lights up when power is connected and the amp is off. The light goes off when the amp is on. TC2000 controller + 1 x sta505 or tp2050 output stage chip. Input sensitivity 1.5V Input impedance 50K Comes assembled as pictured. Dimensions: 8cm x 7cm x 4cm Ouput power (stereo) RMS @4 ohm with supply voltages: 24V - 57W, 21V - 37W, 18V - 31W, 15V - 22W, 12V - 14.5W, 9V - 8W Ouput power (stereo) RMS @6 ohm with supply voltages: 24V - 42W, 21V - 33W, 18V - 23W, 15V - 16W, 12V - 10W, 9V - 5.9W We don't have any measurments for 8 ohm, but you might get an idea from looking at the 4 and 6 ohm ratings.