HPI Racing 74108 Pro Glow Plug Igniter Set with AC Charger (120v)
HPI Racing brand Glow Plug Igniter with Cap Meter and AC Charger from HPI Racing.
The glow starter is used to heat a glow plug while starting an engine.
FEATURES:
Hot pink machined and knurled aluminum battery holder.
NiCd cell provides higher voltage under a load than an alkaline cell.
Meter has green area for charged and red area for must recharge.
Spring-loaded locking socket design.
Comes on a picture instruction header card.
YOU WILL RECEIVE:
One Glow Starter with Cap Volt Meter.
One Panasonic 1.2volt, 1300mAh sub-C size NiCd Battery
One AC Charger (United States Standard)
REQUIREMENTS:
Charging of NiCd battery for ten hours before use.
SPECIFICATIONS:
Adaptor Input: AC 120V~60Hz 2W (United States Standard)
Adaptor Output: DC 1.25V at 170mA
Shaft Length: 2-1/4 (57mm)
COMMENTS
Battery for this glow-starter can be replaced with another sub-C
type battery by unscrewing the battery holder.
dew 11/18/00
ir/jl